Publish Time: 2021-02-20 Origin: Site
Press Brake Tooling
Our company specialized in supplies of press brakes tools for various press brake models and manufacturers. We are able to offer any standard or non-standard (sword, acute, hemming, gooseneck, punches and dies, hemming sets, stamps, punch holders, die holders, adapters, die inserts, radius tooling, self centering 2V dies, single V die, multi V die etc.) for main press brake systems such as Amada, LVD, Accurpress, ACL, Prima power, Haco, Salagnini, MVD, Colgar, Dener, Deratech, Promecam-EURO Style, Trumpf-WILA, Beyeler, Yangli, Yawei, Ysd etc. We can supply rich selection of standard shapes or to make any special tools under request of customer including the length of 6000-8000 mm in one piece.
Raw material is provided by qualified suppliers and chemical composition corresponds to international standards. Therefore, raw material yield and tensile strength are guaranteed.
Material Type | Mechanical resistance of the material and the tool body | Hardness of the material and the tool body | Hardness of the operating surfaces after induction hardening |
42CrMo4 | 900-1150 N/mm2 | 29,1 - 36,9 HRc | 54 - 60 HRc |
C45 | 560-710 N/mm2 | 12 - 15,5 HRc | 54 - 60 HRc |
Specifications for the maximum press force kN/m are indicated as such, 1 t = 10 kN.